The CATS Air Treatment System has been designed such that
it can be placed in a horizontal or vertical manner, which ever is
more convenient to your particular application. The unit should
be placed so that the exhaust fan provides unimpeded air flow
into the room or airspace being treated. Place the CATS Unit on
a high shelf, on top of a cabinet, or other elevated location may
also serve to enhance its operation.

Periodically, you may wish to move the CATS Air Treatment System
into various rooms to assure that all areas receive the beneficial
effects of CX-1000.



The key to the CATS Air Treatment System is the CX-1000 cartridge
that contains a proprietary citrus-based formulation which is volatilized
and dispersed into the air. Since the material in the cartridge is depleted
with time, it is necessary to periodically replace it for maximum
effectiveness. The useful life of the cartridge will vary, depending on
the environment in which it is used. If it is used in a relatively small,
closed space with normal temperature and humidity, it will last longer
than if it is used in a more open space with lower humidity or higher
temperatures. As a rule of thumb, the cartridge should last approximately
30 days under optimum conditions; however, you are the best indicator.
When you notice a reduction in the beneficial effects of the system, that is
probably the best time to replace the cartridge.

To Install A New Cartridge

1. Be sure that the CATS Unit is OFF and unplugged.
2. Remove intake grill (a coin or key works well).
3. Remove the new CX-1000 cartridge from its protective wrapper and
insert it into the cartridge cavity.
4. Install the Electrostatic Pre-filter in front of the CX-1000 cartridge.
5. Replace the intake grill.
6. Plug the power cord into a grounded 120V AC/60Hz wall outlet.
7. Turn on the power switch. Your CATS Unit should now be operating,
as evidenced by exhaust fan operation and the illuminated on/off switch.

Replace the Cartridge

To replace the CX-1000 cartridge, follow the above procedure, making
absolutely certain that the CATS unit is OFF and unplugged. In addition,
if the Electrostatic pre-filter shows any accumulation of dust or dirt, rinse
it under running water and be sure that it is completely dry before reinstalling it.